A friend of ours says that they used their living room table to do some ironing and after they were done they found the finish on the table was white. They ask how do they repair this and will it be easy?
This is a common problem with real wood or veneer wood tables with a lacquer finish. This can also happen with a polyurethane finish that is degraded. The problem that is seen is …
In this How To Guide we are going to cover the beginning steps of understanding Canning. The process is not extremely difficult but you need to be careful to follow the canning procedures and a specific recipe that has been tested for canning.
The first thing you are probably saying is I don’t want to follow someone else’s recipe but the thing is canning recipes are specifically designed so that when the food is processed …
So this is a quick question from one of our friends. They ask how do you make a square hole in something without special tools?
This is pretty common and depending on the material you are working with the tools you will use will be slightly different but it is possible to make pretty good square holes in things with common tools you probably have in your shop.
The first thing you need to do is …
One of our friends is having a problem… it seems that the molding around their window has been deteriorated for many years and finally it gave away and their blind has fallen off.
The problem is probably bigger than they think it is. The way the previous repairs were made were just beyond bad workmanship it seems that they just threw some caulk or spackel on the molding and didn’t even care to sand it …
A friend that is remodeling their bathroom asks about preparing the surface for new mortar.
I rented a chipper hammer and was able to take out the tile fairly easily. Now the thinset remains. Do I need to do a perfect job here? My understanding is that I want to make it as flat as possible to make my life easier when I trowel over it with new thinset.
When you are preparing a bathroom for tiling there …
A friend asks: My dad needs to get his nail gun repaired and he rather have a shop fix it than fix it himself. What is the best place to take it for repair?
So this is a common question. Where do you go when your high dollar Nail Gun brakes. Well the first thing is if you don’t feel you are up to doing the work you should look into having a repair shop …
A friend asks a question about some wood floors he discovered under his carpeting. The home is pretty old and as you will see the floors are distressed but no large cracks or heavy gashes.
He says I have never done any flooring work so I have a couple questions.What should I fill the cracks in with? Should I just leave them and let them fill with polyurethane? What kind of sander is best? I’ve …
A friend picked up a stainless steel refrigerator for at a really great discount but it had some cosmetic damage from what seemed to be scotch tape and they are wondering how to clean or restore the surface.
In this case there is either chemical damage from the tape or whatever made those marks or there is physical damage to the surface. Most likely if you don’t see any scratches on the surface and the …
One of our friends asks how do they fix a chip in the bowl of their toilet that happened when they dropped something in it. Should they fix the hole or replace the whole toilet.
This is a common problem in the bathroom. You wake up and by accident drop something heavy into the toilet and cause a crack or hole in the side of the bowl.
The first thing you have to understand is that …
This happens to most people eventually. Their Bathtub starts looking bad because the paint is pealing or chipping or maybe there is even some rust starting to form. Eventually all metal products will rust and the paint will fail if you put it in use. Bathtubs don’t see a lot of use continually but over the years with the moisture and cracking of paint the tub will need fixing.
Now the person asking for help …
A friend asks how much garden do they need to be self sustaining for homestead living? This is one of the first questions people ask when they look into the idea of Homestead living. They want to be off the grid and fully self sustaining but they have no background in anything related. This is a huge jump and without educating yourself you are likely to fail. You will fail because you don’t understand …
One of our friends has a problem with their relatively new range. The problem is when they turn the back burner off it will stay on low. They tried removing the burner and changing it with the other one that is the same size but this is not fixing it.
Ok so this is probably a problem with the Range’s Switch. The switch that controls the electricity to the burner could be shorted and this …